Palm Oil Solvent Extraction Equipment Manufacture in Pakistan

Solvent Extraction Plant - Eonmetall

• Type: palm oil extraction equipment
• Usage/Application: palm fruit, palm kernel
• Production capacity: 1-10T/D
• Voltage: 220V/380v
• Weight: 1 ton
• Dimension (L*W*H): 2000x1400x1850mm
• Power (W) : 7.5-20kw
• Country: pakistan

A food grade solvent known as hexane is used to extract the remaining 5% – 6% of residual crude palm oil (CPO) available in palm-pressed fibre, thereby enhancing oil extraction rate (OER) by 0.5%. Palm Kernel Oil Extraction (PKOE) Plant, is designed to extract the oil from kernel cake by means of solvent. This shall extract an additional 3% PKO.

Palm Kernel Oil Extraction: Traditional and Modern Methods

• Type: palm oil processing machine
• Production capacity: According to your capacity
• Voltage: According to your needs
• Weight: 1000kg
• Dimension (L*W*H): According to your requirement
• Power (W): 11KW

The solvent extraction process ensures minimal oil wastage, making it a cost-effective and industrially preferred method. Preparation and Grinding. Before solvent extraction, the palm kernel cake (the byproduct of mechanical pressing) is further ground into smaller particles.

The oil extraction yield of 90% was achieved using n-hexane as an organic solvent at the optimized extraction conditions. The optimized parameters for oil extraction include the oil to solvent ratio of 1:1, mixing speed of 500 rpm, mixing time of 25 min, and pH of 10.

palm oil line

• Usage: palm oil
• Production capacity: 1-100T/D
• Voltage:380V/440v
• Weight: depends on capacity
• Dimension (L*W*H): depends on capacity
• Power (W) : 20-50KW

After palm oil expelling, the solids parts discharged from the screw press is mixture of fiber and nuts. In palm kernel recovery plant, the nuts and fiber are separated by physical means. The nuts are sent to palm kernel crushing and solvent extraction plant to make palm kernel oil, while the fiber is used as biomass fuel in boiler on-site.

During the oil extraction, the vegetable oil is removed from the cell structure using a solvent, usually n-hexane, which is a volatile and inflammable liquid. In order to enable the solvent to penetrate unhindered into the seed, the cell walls have to be broken up and the diffusion paths have to be made as short as possible.

Palm Kernel Oil Extraction Machine

• Type: cooking oil extraction machine
• Production capacity: 100 kg per hour
• Dimension (length x width x height): 1850*880*1750 mm
• Voltage: 380 V
• Weight: 200 kg
• Main components: motor, pressure vessel, Pump, PLC, Gear, Bearing, Motor, Gearbox

However, For the purposes of small-scale operations it is sufficient to mention the solvent extraction process is an alternative for high capacity mills. However the process is not recommended for small enterprises. Basic Unit Operations of Palm Kernel Oil Extraction Process: 1. Palm Kernel Pre-treatment; 2. Oil Extraction; 3. Solvent Recovery

from West Africa. In early 1870’s, oil palm tree was introduced in Malaysia as ornamental plant by the British. Nowadays oil palm tree is one of the most important commercial crops in Malaysia. Malaysia is known as one of the world’s largest palm oil producer, which contributes to 11% of the world’s oil and fat

Palm Kernel Oil Solvent Extraction Line

• Raw Material: palm
• Production capacity: 100 kg/h
• Dimension (L*W*H): 37.5*16*27.5 cm
• Voltage: 220 V
• Weight: 9.5 kg
• Main components: motor

Hongde’s palm kernel oil pressing and extraction production line can flexibly adjust the process according to the characteristics of the palm kernel: For palm kernels with high shell content, the kernel-shell separation link is strengthened, and multi-stage vibrating screens and wind sorting devices are added to control the shell residue residue rate below 3%; If the moisture content of the

It uses the solvent oil to oil raw materials after full immersion for high temperature extraction, after degumming, dehydration, decolorization, deodorization, deacidification and other processes processed, the most important feature is the high oil yield, low production costs, which is one of the reasons why the price of many edible oils are